CURRENT PROCESSING TIMES: APPAREL 5-7 Business Days | Transfers, Stickers, Blanks, & Vinyl 2-5 Business Days | Pre-Orders As Stated

Pressing Instructions

All transfers require accurate pressure & temperature. We strongly suggest having a digital heat gun on hand and monitoring your heat throughout the process.

Each heat press is different and needs to be tested prior to pressing. We can not be held responsible for pressing issues due to wrong temp/pressure/timing. 

Heat Transfer Vinyl Instructions

For application on Cotton, Polyester, and Cotton/Poly Blends. Shirt can be any color you wish, as the transfer is printed on a solid white vinyl to enhance the colors of each design.

Prep Work:

Set your heat press to 300 Degrees F.
Set pressure to Medium.
Lint roll the item you will be pressing the design to.

Pressing Instructions:

Remove the backing from the HTV Transfer.
Prepress your item 3-5 seconds to remove any moisture.
Position your transfer, sticky side down onto your item.
Press for 15 Seconds with Medium Pressure.
Peel mask warm. Allow 5-10 seconds for cooling prior to peeling.

Care Instructions:

Machine wash warm, no softener. Dry as normal inside out. Wait 24 hours before first wash.


1 & 2 Color Screen Print Transfers 
Do NOT use a teflon cover sheet. This can create moisture and cause issues with the transfer pressing correctly. 
Timing: 7 Seconds (Prepress) / 7 Seconds (Final Press)
Temperature: 325 F
Pressure: 60 PSI / 8-9 Heavy
Peel: Hot/Immediately 

     Full Color Screen Print Transfers (Soft Hand Feel)
    This transfers requires very accurate heat/pressure, they are a very soft transfer but can be a bit tricky. Use the heat gun to verify your temperature settings prior to pressing. Do NOT trust your heatpress to read accurately.
    Timing: 7 Seconds (Prepress) / 7 Seconds (Final Press)
    Temperature: 375 F
    Pressure: 60 PSI / 8-9 Heavy
    Peel: Hot/Immediately 

      Sublimation Transfer Instructions

      For application on 50% polyester or higher garment (these DO NOT work on 100% cotton!). 100% White Polyester will produce the best color results. You can use shirts that are light in color like: gray, tan, pastels, but know your colors will be faded.

      Pro Tip: 50% Polyester Tees have an amazing vintage fade look.

      *USE A TEFLON SHEET*

      Prep Work:

      Set your heat press to 400 Degrees F.
      Set pressure to Medium.
      Lint roll the item you will be pressing the design to.

      Pressing Instructions:

      Place a sheet of copy paper inside your item to prevent bleeding through.
      Prepress your item 3-5 seconds to remove any moisture.
      Position your transfer face down (use heat tape if desired) and cover with Teflon sheet.
      Press for 45-60 Seconds with Medium Pressure.
      Remove transfer immediately.